To the top of the document
Cruze
   
GMDE Start Page Load static TOC Load dynamic TOC Help?

Fuel Feed Pipe Replacement

Removal Procedure

Warning: Refer to Petrol/Petrol Vapours Warning in the Preface section.

  1. Disconnect the battery negative cable. Refer to Battery Negative Cable Disconnection and Connection .
  2. Remove the engine cover. Refer to Engine Cover Replacement .

  3. 2028098
  4. Disconnect the fuel feed pipe (1) from the fuel feed pipe connector (4).
  5. Unclip the fuel feed front pipe (1) from the bracket clip (2).
  6. Open the bracket clip (3) and remove the fuel feed pipe.
  7. Remove the front compartment insulator. Refer to Front Compartment Insulator Replacement .

  8. 2028091
  9. Remove the 4 exhaust pipe front hanger bolts (2).
  10. Remove and DISCARD the drivetrain and front suspension frame bolt (3)
  11. Remove the drivetrain and front suspension frame.

  12. 2028099
  13. Unclip the fuel feed pipe (1) from the 4 bracket clips (2).

  14. 2028100
  15. Unclip the fuel feed pipe (3) from the rear bracket clip (2).
  16. Disconnect the fuel feed pipe (3) from the fuel feed pipe connector (1).
  17. Remove the fuel feed pipe (3).

Installation Procedure


    2028100
  1. Install the fuel feed pipe (3).
  2. Connect the fuel feed pipe (3) to the fuel feed pipe connector (1).
  3. Clip in the fuel feed pipe (3) to the rear bracket clip (2).

  4. 2028099
  5. Clip in the fuel feed pipe (1) to the 4 bracket clips (2).

  6. 2028091
  7. Install the drivetrain and front suspension frame.
  8. Warning: Refer to Torque-to-Yield Fastener Warning in the Preface section.

    Caution: Refer to Fastener Caution in the Preface section.

  9. Install the NEW drivetrain and front suspension frame bolt (3) and tighten to 120 N·m (89 lb ft) + 130°.
  10. Install the 4 exhaust pipe front hanger bolts (2) and tighten to 20 N·m (15 lb ft).
  11. Install the front compartment insulator. Refer to Front Compartment Insulator Replacement .

  12. 2028098
  13. Install the fuel feed pipe (1) and look the bracket clip (3).
  14. Clip in the fuel feed front pipe (1) to the bracket clip (2).
  15. Connect the fuel feed pipe (1) from the fuel feed pipe connector (4).
  16. Install the engine cover. Refer to Engine Cover Replacement .
  17. Connect the battery negative cable. Refer to Battery Negative Cable Disconnection and Connection .
   


© Copyright Chevrolet. All rights reserved