Cruze

Rear Wheel Speed Sensor Replacement -- Drum Brake

1. Remove rear wheelhouse panel liner. Refer to Rear Wheelhouse Panel Liner Replacement .
2. Remove the rear brake hose from the wheel cylinder and the rear backing plate. Refer to Rear Brake Hose Replacement : Disc Brake



3. Remove the wheel speed sensor screw (2) from the steering knuckle.
4. Remove wheel speed sensor (1).
5. Remove wiring harness (3) from bracket (4).



6. Disconnect the electrical connector (1).
7. Remove wheel speed sensor from vehicle

1. Install the wheel speed sensor to the vehicle
2. Connect the electrical connector (1).



3. Install the wheel speed sensor (1) to steering knuckle.
4. Install wiring harness (3) at the bracket (4).

Caution: Refer to Fastener Caution in the Preface section.

5. Install the wheel speed sensor screw (2) and tighten to 9 N·m (80 lb in).
6. Install the rear brake hose to the wheel cylinder and the rear backing plate. Refer to Rear Brake Hose Replacement : Disc Brake
7. Install rear wheelhouse panel liner. Refer to Rear Wheelhouse Panel Liner Replacement .