Cruze

Fuse Block Replacement

1. Disconnect battery negative cable. Refer to Battery Negative Cable Disconnection and Connection



2. Unlock the retaining tabs on the battery fuse box cover, and open the cover (1).
3. Remove the positive battery cable to starter nut (2).
4. Remove the positive battery cable to starter (3) from the battery.
5. Remove the positive battery cable. Refer to Battery Positive Cable Replacement



6. Remove 2 body wiring harness nuts (1) and body wiring harness.
7. Remove fuse block (2).

1. Install fuse block.

Caution: Refer to Fastener Caution in the Preface section.

2. Install body wiring harness and 2 body wiring harness nuts.

Tighten:
4.7 N·m (42 lb in)

3. Install the positive battery cable. Refer to Battery Positive Cable Replacement



4. Install the positive battery cable to starter (3).
5. Install the positive battery cable to starter nut (2).

Tighten:
9 N·m (80 lb in)

6. Close the battery fuse box cover (1) and lock the retaining tabs on the battery fuse box.
7. Connect battery negative cable. Refer to Battery Negative Cable Disconnection and Connection