To the top of the document
Cruze
   
GMDE Start Page Load static TOC Load dynamic TOC Help?

Clutch Actuator Cylinder Pipe Replacement - D33

Removal Procedure
  1. Remove the manual transmission. Refer to Transmission Replacement .

    2. 2028204
  2. Remove the clutch actuator cylinder pipe connector (1) from the clutch housing.
  3. Remove the clutch actuator cylinder pipe nut (3).
  4. Remove the clutch actuator cylinder pipe (2).

Installation Procedure

    2028204
  1. Install the clutch actuator cylinder pipe connector (1) to the clutch housing.

    2. Caution: Refer to Fastener Caution in the Preface section.

  2. Install the clutch actuator cylinder pipe nut (3) and tighten to 18 N·m (14 lb ft).
  3. Install the clutch actuator cylinder pipe (2).
  4. Install the manual gearbox. Refer to Transmission Replacement .
   


© Copyright Chevrolet. All rights reserved