DEFINITION: Foamy or discoloured oil or an engine oil "overfill" condition may indicate coolant entering the engine crankcase. Low coolant levels, an inoperative cooling fan, or a faulty thermostat may lead to an "overtemperature" condition which may cause engine component damage. Contaminated engine oil and oil filter should be changed.

1. Inspect the oil for excessive foaming or an overfill condition. Oil diluted by coolant may not properly lubricate the crankshaft bearings and may lead to component damage. Refer to Lower Engine Noise, Regardless of Engine Speed .
2. Inspect by performing a cylinder compression test. Two cylinders "side-by-side" on the engine block with low compression may indicate a failed cylinder head gasket. Refer to Engine Compression Test .

Faulty external engine oil cooler

Replace the components as required.

Faulty cylinder head gasket

Replace the head gasket and components as required. Refer to Cylinder Head Cleaning and Inspection and Cylinder Head Replacement .

Warped cylinder head

Replace the cylinder head. Refer to Cylinder Head Replacement .

Cracked cylinder head

Replace the cylinder head and gasket. Refer to Cylinder Head Replacement .

Cracked cylinder liner or engine block

Replace the components as required.

Cylinder head, block, or manifold porosity

Replace the components as required.