To the top of the document
Cruze
   
GMDE Start Page Load static TOC Load dynamic TOC Help?

Power Steering Pump Belt Installation

Special Tools

CH-49800 Installer


    2189253
  1. Relieve the tension of the drive belt (1). Refer to Drive Belt Replacement
  2. Install CH-49800 installer (3) on the power steering pump pulley.
  3. Install NEW power steering belt (2) aligning pulley water pump.
  4. Rotate the power steering pump pulley clockwise using hex spanner on the shaft power steering pump pulley.
  5. Remove the CH-49800 installer (3).
  6. Check that the belt is installed correctly.
   


© Copyright Chevrolet. All rights reserved