Preliminary Procedure

1. Remove engine cover. Refer to Engine Cover Replacement .
2. Remove air cleaner assembly. Refer to Air Cleaner Assembly Replacement .
3. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
4. Install mounting engine / transmission. Refer to Engine/Transmission Mounting

1

Engine Mount Bracket Bolt (Qty: 3)

Caution: Refer to Fastener Caution in the Preface section.

Caution: Refer to Torque-to-Yield Fastener Caution in the Preface section.

Procedure

Use NEW engine mount bracket bolts, do NOT reuse old bolts.

Tighten
50 N·m + 60°- 75° (37 lb ft + 60°- 75°)

2

Engine Mount

3

Engine Mount Bolt (Qty: 2)

Tighten
62 N·m (46 lb ft)

4

Engine Mount Nut

Tighten
62 N·m (46 lb ft)