To the top of the document
Cruze
   
GMDE Start Page Load static TOC Load dynamic TOC Help?

Glow Plug Controller Replacement

Removal Procedure
  1. Disconnect battery negative cable. Refer to Battery Negative Cable Disconnection and Connection .

    2. 2027662
  2. Disconnect the glow plug controller wiring harness plug (4).
  3. Remove the glow plug controller bracket (2) from the battery tray.

Installation Procedure

    2027662
  1. Install the glow plug controller bracket (2) at the battery tray.
  2. Connect the glow plug controller wiring harness plug (4).
  3. Connect battery negative cable. Refer to Battery Negative Cable Disconnection and Connection .
   


© Copyright Chevrolet. All rights reserved