Cruze

Drive Belt Tensioner Replacement

1. Open the bonnet.
2. Remove the engine sight shield. Refer to Engine Sight Shield Replacement .
3. Remove the air cleaner assembly. Refer to Air Cleaner Assembly Replacement .
4. Raise the vehicle full height. Refer to Lifting and Jacking the Vehicle .
5. Remove the drive belt. Refer to Alternator, Air Conditioning Compressor, and Power Steering Pump Belt Replacement .



6. Remove the 2 drive belt tensioner bolts (2).
7. Remove the drive belt tensioner (1).

1. Clean the drive belt tensioner thread.



2. Install the drive belt tensioner (1).

Caution: Refer to Fastener Caution in the Preface section.

3. Install the 2 drive belt tensioner bolts (2) and tighten to 45 N·m (33 lb ft).
4. Install the drive belt. Refer to Alternator, Air Conditioning Compressor, and Power Steering Pump Belt Replacement .
5. Lower the vehicle full height.
6. Install the air cleaner assembly. Refer to Air Cleaner Assembly Replacement
7. Install the engine sight shield. Refer to Engine Sight Shield Replacement
8. Close the bonnet.