Cruze

Engine Mount Replacement - Right Side

1. Open the bonnet.
2. Remove the engine sight shield. Refer to Engine Sight Shield Replacement .
3. Remove the air cleaner assembly. Refer to Air Cleaner Assembly Replacement .
4. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
5. Install Engine/Transmission Mounting. Refer to Engine/Transmission Mounting .
6. Lower the vehicle.



7. Unclip the cooling liquid hose from the bracket (2).
8. Remove the engine mount nut (5).
9. Remove the engine mount bolts (1).
10. Remove the engine mount bolts (4).
11. Remove the engine mount (3).

1. Install the engine mount (3).

Caution: Refer to Fastener Caution in the Preface section.

2. Install the engine mount bolts (4) and tighten to 40 N·m (30 lb ft).
3. Install the engine mount bolts (1) and tighten to 60 N·m (44 lb ft).
4. Install the engine mount nut (5) and tighten to 62 N·m (46 lb ft).
5. Clip in the cooling liquid hose from the bracket (2).
6. Raise the vehicle.
7. Remove Engine/Transmission Mounting. Refer to Engine/Transmission Mounting .
8. Lower the vehicle.
9. Install the air cleaner assembly. Refer to Air Cleaner Assembly Replacement .
10. Install the engine sight shield. Refer to Engine Sight Shield Replacement .
11. Close the bonnet.