Cruze

Engine Flywheel Replacement

Special Tools

For equivalent regional tools, Refer to Special Tools : 1.6L LXT .

1. Open the bonnet.
2. Remove the transmission. Refer to Transmission Replacement .



3. Install the EN-652 holder (1), lock the flywheel (2) via the starter ring gear.
4. Loosen the 6 flywheel bolts.
5. Remove the EN-652 holder (1).



6. Remove and DISCARD the 6 flywheel bolts (1, 2).
7. Remove the flywheel (3).

1. Clean the thread in the crankshaft.



2. Install the flywheel (2).
3. Install the EN-652 holder (1).

Caution: Refer to Fastener Caution in the Preface section.

Caution: Refer to Torque-to-Yield Fastener Caution in the Preface section.




4. Install the 6 NEW flywheel bolts (1, 2) and tighten the bolts in 3 passes using the EN-45059 meter :

•	First pass to 35 N·m (26 lb ft)

•	Second pass to additional 30°.

•	Third pass to an additional 15°.

5. Remove the EN-652 holder.
6. Install the transmission. Refer to Transmission Replacement .
7. Close the bonnet.