Cruze

Instrument Panel Tie Bar Replacement — Right Hand Drive

1. Remove instrument panel compartment. Refer to Instrument Panel Compartment Replacement .



2. Remove instrument panel wiring harness (2) from instrument panel tie bar (1).

Disconnect electrical connectors.




3. Remove instrument panel tie bar (1).

Remove 4 instrument panel tie bar bolts (3, 4).

Remove 2 instrument panel tie bar nuts (2).

Caution: Refer to Fastener Caution in the Preface section.




1. Install instrument panel tie bar (1).

Install 4 instrument panel tie bar bolts (3, 4) and tighten to 22 N·m (17 lb ft).

Install 2 instrument panel tie bar nuts (2) and tighten to 9 N·m (80 lb in).




2. Install instrument panel wiring harness (2) to instrument panel tie bar (1).

Connect electrical connectors.

3. Install instrument panel compartment. Refer to Instrument Panel Compartment Replacement .