Preliminary Procedures

1. Using a scan tool, check for DTCs.
2. Remove the front bumper. Refer to Front Bumper Fascia Replacement .
3. Remove the headlamp. Refer to Headlamp Replacement .

1

Forward Lamp Wiring Harness

Procedure

1. Create a work area large enough to lay out the new and old wiring harnesses.
2. Use care when removing inaccessible harness retainers. Replacement retainers may not be available.
3. Compare the new and old wiring harnesses for the same part number, the same number of wiring harness connectors, the same pin settings, and the same harness retainers.
4. Follow a logical order of steps during the replacement to ensure proper installation of the harness.