Cruze

Crankshaft Front Oil Seal Replacement

Special Tools

For equivalent regional tools, refer to Special Tools .

1. Open the bonnet.
2. Remove the crankshaft balancer. Refer to Crankshaft Balancer Replacement .
3. Place collecting basin underneath.



4. Remove crankshaft front oil seal (2) from engine front cover. Use EN-45000 remover (1).

1. Install NEW crankshaft front oil seal (1) to EN-960 installer (2).



2. Install crankshaft front oil seal by means of EN-960 installer (1) to engine front cover (2).



3. Ensure that crankshaft front oil seal (2) is flush with engine front cover (1).
4. Install crankshaft balancer. Refer to Crankshaft Balancer Replacement .
5. Remove collecting basin.
6. Check and correct engine oil level.
7. Close bonnet.