To the top of the document
Cruze
   
GMDE Start Page Load static TOC Load dynamic TOC Help?

Manual Transmission Shift Lever and Selector Lever Cable Replacement

Special Tools

DT-6042-A Dismantling Key

For equivalent regional tools, refer to Special Tools .

Removal Procedure
  1. Remove transmission control. Refer to Transmission Control Replacement .
  2. Remove battery tray. Refer to Battery Tray Replacement .

    3. 2191413
  3. Remove gear lever and selector lever cable (2) from transmission control housing (3) using DT-6042-A dismantling key.
  4. Remove gear lever and selector lever cable from gear lever and selector lever cable bracket (1).

    5. 2191408
  5. Remove gear lever and selector lever cable (1) from bulkhead.
  6. Remove gear lever and selector lever cable from inside the vehicle.

Installation Procedure

    2191408
  1. Install gear lever and selector lever cable from inside the vehicle.

    2. Note: Check for correct fit.

  2. Install gear lever and selector lever cable (1) to bulkhead.

    3. 2191413
  3. Install gear lever and selector lever cable (2) to gear lever and selector lever cable bracket (1).
  4. Install gear lever and selector lever cable to transmission control housing (3).
  5. Install transmission control. Refer to Transmission Control Replacement .
  6. Install battery tray. Refer to Battery Tray Replacement .
   


© Copyright Chevrolet. All rights reserved