To the top of the document
Cruze
   
GMDE Start Page Load static TOC Load dynamic TOC Help?

Transmission Rear Mount Replacement - Hydraulic Power Steering

Removal Procedure
  1. Remove steering gear. Refer to Steering Gear Replacement : Hydraulic Power Steering .
  2. Remove transmission rear mount bracket. Refer to Transmission Mount Bracket Replacement - Rear .

    3. 2191544
  3. Remove 2 transmission rear mount nuts (3) and 2 transmission rear mount bolts (1).
  4. Remove transmission rear mount (2).

Installation Procedure

    2191544
  1. Install transmission rear mount (2).
  2. Install 2 transmission rear mount bolts (1).

    3. Caution: Refer to Fastener Caution in the Preface section.

  3. Install 2 transmission rear mount nuts (3) and tighten to 110 N·m (81 lb ft).
  4. Install transmission rear mount bracket. Refer to Transmission Mount Bracket Replacement - Rear .
  5. Install steering gear. Refer to Steering Gear Replacement : Hydraulic Power Steering .
   


© Copyright Chevrolet. All rights reserved