To the top of the document
Cruze
   
GMDE Start Page Load static TOC Load dynamic TOC Help?

Transmission Rear Mount Replacement

Removal Procedure
  1. Remove steering gear. Refer to Steering Gear Replacement : Hydraulic Power Steering .
  2. Remove transmission rear mount bracket. Refer to Transmission Mount Bracket Replacement - Rear .

    3. 2191543
  3. Remove 2 transmission rear mount nuts (3) and 2 transmission rear mount bolts (1).
  4. Remove transmission rear mount (2).

Installation Procedure

    2191543
  1. Install transmission rear mount (2).
  2. Install 2 transmission rear mount bolts (1).

    3. Caution: Refer to Fastener Caution in the Preface section.

  3. Install 2 transmission rear mount nuts (3) and tighten to 110 N·m (82 lb ft).
  4. Install transmission rear mount bracket. Refer to Transmission Mount Bracket Replacement - Rear .
  5. Install steering gear. Refer to Steering Gear Replacement : Hydraulic Power Steering .
   


© Copyright Chevrolet. All rights reserved