Cruze

Generator Replacement — 1.4L LDD, LUH, and LUJ

1. Open the bonnet.
2. Disconnect the battery negative cable. Refer to Battery Negative Cable Disconnection and Connection .
3. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .



4. Disconnect the generator wiring harness connector (3).
5. Remove the alternator positive cable nut (1).
6. Remove the generator positive cable (2).
7. Lower the vehicle.
8. Remove the drive belt tensioner. Refer to Drive Belt Tensioner Replacement .



9. Remove the 2 generator bolts (2).
10. Remove the alternator (1) from above.

1. Install the alternator (1) from above.

Caution: Refer to Fastener Caution in the Preface section.

2. Install the 2 generator bolts (2) and tighten to 35 N·m (26 lb ft).
3. Install the drive belt tensioner. Refer to Drive Belt Tensioner Replacement .
4. Raise and support the vehicle.



5. Connect the generator wiring harness connector (3).
6. Install the alternator positive cable (2).
7. Install the alternator positive cable nut (1) and tighten to 17 N·m (13 lb ft).
8. Lower the vehicle.
9. Connect the battery negative cable. Refer to Battery Negative Cable Disconnection and Connection .
10. Close the bonnet.