To the top of the document
Cruze
   
GMDE Start Page Load static TOC Load dynamic TOC Help?

Engine Oil Cooler Installation


    2191862

    Note: Lubricate the oil cooler seal (8) with clean engine oil.

  1. Install the engine oil cooler assembly (6) along with 2 NEW seals (8) and (9).
  2. Install the 3 oil cooler bolts (5) and tighten to 10 N·m (89 lb in).
  3. Install the oil cooler coolant outlet pipe bolt (7) and tighten to 10 N·m (89 lb in).
  4. Install the oil cooler coolant outlet hose (2) to the engine coolant thermostat housing.
  5. Install the oil cooler coolant outlet hose clamp (1).
  6. Install the oil cooler coolant inlet hose (4) to the water outlet.
  7. Install the oil cooler coolant inlet hose clamp (3).
   


© Copyright Chevrolet. All rights reserved