To the top of the document
Cruze
   
GMDE Start Page Load static TOC Load dynamic TOC Help?

Engine Oil Cooler Inlet Hose Replacement - 1.4L LUH and LUJ


2192291

Callout

Component Name

Preliminary Procedure

  1. Open the bonnet.
  2. Drain the cooling system. Refer to Cooling System Draining and Filling .

1

Oil Cooler Inlet Hose Clamp

Procedure

  1. Place a drain pan below the vehicle.
  2. Remove / install engine coolant air bleed hose clamp.

2

Oil Cooler Inlet Hose Clamp

Procedure

  1. Place a drain pan below the vehicle.
  2. Remove / install engine coolant air bleed hose clamp.

3

Oil Cooler Inlet Hose

   


© Copyright Chevrolet. All rights reserved