Cruze

Charge Air Cooler Inlet Air Hose Replacement

1. Open the bonnet.
2. Disconnect the battery. Refer to Battery Negative Cable Disconnection and Connection .



3. Loosen the charge air cooler inlet air hose clamp (1).
4. Remove the charge air cooler inlet air hose (2) from the turbocharger.
5. Remove the front bumper fascia. Refer to Front Bumper Fascia Replacement .



6. Unlock the charge air cooler inlet air hose quick connector (1).
7. Remove the charger air cooler inlet air hose (2).

1. Install the charger air cooler inlet air hose (2) to the charge air cooler until it engages audibly.

Caution: Refer to Fastener Caution in the Preface section.

2. Install the front bumper fascia. Refer to Front Bumper Fascia Replacement .



3. Install the charger air cooler inlet air hose (2) to the turbocharger.
4. Install and tighten the charger air cooler inlet air hose clamp (1).
5. Connect the battery. Refer to Battery Negative Cable Disconnection and Connection .
6. Close the bonnet.