Cruze

Transmission Fluid Cooler Hose/Pipe Replacement

1. Remove battery tray. Refer to Battery Tray Replacement .
2. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
3. Remove front bumper fascia. Refer to Front Bumper Fascia Replacement .



4. Remove the fluid level drain plug (1).
5. Drain transmission fluid into a suitable container.



6. Disconnect transmission fluid cooler pipe (2) from transmission fluid auxiliary cooler and radiator. Remove 2 retainers (1). Refer to Transmission Fluid Cooler Hose/Pipe Quick-Connect Fitting Disconnection and Connection .
7. Remove transmission fluid cooler pipe (2).

1. Install transmission fluid cooler pipe (2).

Caution: Refer to Component Fastener Tightening Caution in the Preface section.

2. Connect transmission fluid cooler pipe (2) to transmission fluid auxiliary cooler and radiator. Install 2 retainers (1). Refer to Transmission Fluid Cooler Hose/Pipe Quick-Connect Fitting Disconnection and Connection .

Caution: Refer to Fastener Caution in the Preface section.




3. Install the fluid level drain plug (1) and tighten to 12 N·m (106 lb in)
4. Top up transmission fluid and check transmission fluid level. Refer to Transmission Fluid Level and Condition Check .
5. Install front bumper fascia. Refer to Front Bumper Fascia Replacement .
6. Install battery tray. Refer to Battery Tray Replacement .