Preliminary Procedures

1. Remove the door trim panel. Refer to Rear Side Door Trim Replacement .
2. Remove the water deflector. Refer to Rear Side Door Water Deflector Replacement .

1

Rear Side Door Catch Bolt (Qty: 2)

Caution: Refer to Fastener Caution in the Preface section.

Tighten
10 N·m (89 lb in)

2

Rear Side Door Catch

Procedure

1. Release the inside handle cable retainers before removing the door latch.
2. Disconnect the door latch electrical connector.
3. Remove the door latch with the handle housing.
4. Transfer the handle and lock rods to the new door latch.
5. Inspect the latch, lock cylinder and handle adjustments. Refer to Rear Side Door Outside Handle Rod Adjustment .