DEFINITION: Lead/pull is the deviation of the vehicle from a straight path on a level road with no pressure on the steering wheel.

Did you perform the Vehicle Leads/Pull diagnostic table?

Go to Step 2

Go to Vehicle Leads/Pulls

Road test the vehicle to verify the complaint. Select a smooth level surface to perform the test.

Does the condition exist?

Go to Step 3

System OK

1. Cross-switch the left front tyre/wheel assembly with the left rear tyre/wheel assembly. Refer to Tyre and Wheel Removal and Installation .
2. Road test the vehicle on a smooth level surface.

Does the vehicle still lead/pull?

Go to Step 6

Go to Step 7

1. Cross-switch the right front tyre/wheel assembly with the right rear tyre/wheel assembly. Refer to Tyre and Wheel Removal and Installation .
2. Road test the vehicle on a smooth level surface.

Does the vehicle still lead/pull?

Go to Wheel Alignment Measurement

Go to Step 8

Replace the left rear tyre.

Is the repair complete?

Go to Step 9

-

Replace the right rear tyre.

Is the repair complete?

Go to Step 9

-

Verify proper vehicle operation.

Does the original condition still exist?

Go to Step 1

System OK