To the top of the document
Cruze
   
GMDE Start Page Load static TOC Load dynamic TOC Help?

Crankshaft Rear Oil Seal Replacement - Automatic Transmission

Special Tools

    • EN-658-1 Installer from EN-658 Kit
    • EN-235-6 Installer from EN-235-D Kit

For equivalent regional tools, refer to Special Tools .

Removal Procedure
  1. Open the bonnet.
  2. Remove the automatic transmission flexplate. Refer to Automatic Transmission Flex Plate Replacement .
  3. Place collecting basin underneath.
  4. Remove the crankshaft rear oil seal.

Installation Procedure

    2190821
  1. Install the crankshaft rear oil seal (1) with EN-235-6 installer (2).

    2. 2190822
  2. Use EN-658-1 installer (1) to strike the crankshaft rear oil seal.
  3. Remove collecting basin.
  4. Install the automatic transmission flexplate. Refer to Automatic Transmission Flex Plate Replacement .
  5. Close the bonnet.
   


© Copyright Chevrolet. All rights reserved