To the top of the document
Cruze
   
GMDE Start Page Load static TOC Load dynamic TOC Help?

Crankshaft Front Oil Seal Replacement

Special Tools

    • EN-45000 Remover - Oil Seal
    • EN-50427 Installer

For equivalent regional tools, refer to Special Tools .

Removal Procedure
  1. Remove the crankshaft pulley. Refer to Crankshaft Pulley Replacement .

    2. 2373200

    Note: Be careful do not damage the sealing surfaces.

  2. Remove the crankshaft front oil seal (1) using EN-45000 remover .

Installation Procedure

    2373200
  1. Install the crankshaft front oil seal ring (1) using the EN-50427 installer .
  2. Install the crankshaft pulley. Refer to Crankshaft Pulley Replacement .
   


© Copyright Chevrolet. All rights reserved