Cruze

Engine Oil Pressure Switch Replacement

1. Remove the air cleaner outlet duct. Refer to Air Cleaner Outlet Duct Replacement .
2. Remove the air cleaner assembly. Refer to Air Cleaner Assembly Replacement .
3. Clip the power steering fluid reservoir outlet hose out of the 2 mounts and hang aside.



4. Remove the 2 bolts (2) from the mount brackets.
5. Remove the power steering fluid reservoir outlet hose mount bracket (1).



6. Disconnect the oil pressure switch wiring harness plug (1) from the engine oil pressure switch (2).
7. Remove the engine oil pressure switch (2).

Caution: Refer to Fastener Caution in the Preface section.




1. Install the engine oil pressure switch (2) and tighten to 20 N·m (15 lb ft).
2. Connect the oil pressure switch wiring harness plug (1) to the engine oil pressure switch (2).



3. Install the power steering fluid reservoir outlet hose mount bracket (1).
4. Install the 2 retaining bolts (2) to the mount brackets and tighten to 10 N·m (89 lb in).
5. Clip in the power steering fluid reservoir outlet hose into the 2 mounts.
6. Install the air cleaner assembly. Refer to Air Cleaner Assembly Replacement .
7. Install the air cleaner outlet duct. Refer to Air Cleaner Outlet Duct Replacement .