Cruze

Fuel Injection Fuel Feed Pipe Installation

Special Tools

EN-50434 Dust Cap - Fuel Rail Port

For equivalent regional tools, refer to Special Tools .

1. Remove the EN-50434 dust cap from the multiport fuel injection fuel rail (3).
2. Loosen the 2 fuel injection fuel rail retaining bolts.
3. Install the fuel feed pipes (1).

Caution: Refer to Fastener Caution in the Preface section.

4. Tighten the 10 fuel injection fuel feed pipe nuts (2) to27 N·m(20 lb ft).
5. Tighten the 2 fuel injection fuel rail retaining bolts to 25 N·m(18 lb ft).