Cruze

Intake Camshaft Installation

Special Tools

EN-50432 Adaptor - Flywheel Fixing

For equivalent regional tools, refer to Special Tools .

Caution: Use extreme care when installing the camshaft not to nick, scratch, or damage the camshaft lobes or bearing surfaces.

Note: 

•	Ensure that the crankshaft is fixed 90° beyond TDC with the EN-50433 fixing tool .

•	Install the camshaft guides in order as removed.

•	Clean the contact surfaces from camshaft, camshaft sprocket and camshaft sprocket bolt. Coat the camshaft bearing surfaces with engine oil.

1. Install the intake camshaft (3).

Note: Tighten the camshaft seat guide cap from cylinder 4 at first.

2. Install the 4 camshaft seat guide caps (2).

Caution: Refer to Fastener Caution in the Preface section.

3. Install the 8 camshaft seat guide cap retaining bolts (1) and tighten to 10 N·m (89 lb in).