Cruze

Turbocharger Oil Return Pipe Replacement

1. Remove the battery negative cable. Refer to Battery Negative Cable Disconnection and Connection .
2. Remove the engine sight shield. Refer to Engine Sight Shield Replacement .
3. Remove the charge air cooler inlet hose Charge Air Cooler Inlet Hose Replacement : 2.0L Diesel LNP → 2.0L Diesel LLW .
4. Remove the exhaust particulate filter. Refer to Exhaust Particulate Filter Removal .



5. Remove the 2 turbocharger bracket bolts (1).
6. Remove the turbocharger bracket (2).



7. Remove the 4 turbocharger oil return pipe bolts (4).
8. Remove the turbocharger oil return pipe (2) and the 2 turbocharger oil return pipe gaskets (1, 3).

1. Install the turbocharger oil return pipe (2) and 2 NEW gaskets (1, 3).

Caution: Refer to Fastener Caution in the Preface section.

2. Install the 4 turbocharger oil return pipe bolts (4) and tighten to 10 N·m (89 lb in).



3. Install the turbocharger bracket (2).
4. Install the 2 bolts (1) to the turbocharger bracket (2) and tighten to 25 N·m (18 lb ft).
5. Install the exhaust particulate filter. Refer to Exhaust Particulate Filter Installation .
6. Install the charge air cooler inlet hose. Refer to Charge Air Cooler Inlet Hose Replacement : 2.0L Diesel LNP → 2.0L Diesel LLW .
7. Install the engine sight shield. Refer to Engine Sight Shield Replacement .
8. Install the battery negative cable. Refer to Battery Negative Cable Disconnection and Connection .