Cruze

Water Pump Pulley Replacement - 2.0L Diesel LNP

Special Tools

EN-46104 Water Pump Pulley Holding Tool

For equivalent regional tools, refer to Special Tools .

1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
2. Remove the engine compartment insulator. Refer to Front Compartment Insulator Replacement .
3. Remove the right front wheelhousing lining. Refer to Front Wheelhouse Liner Replacement .
4. Remove the drive belt and pulley cover. Refer to Drive Belt and Pulley Cover Removal .
5. Remove the drive belt. Refer to Drive Belt Replacement .



6. Counterhold the water pump pulley with the EN-46104 holding tool and remove the 3 water pump pulley bolts (2).
7. Remove the water pump pulley (1).

1. Install the water pump pulley (1).
2. Install the water pump pulley bolts (2).

Caution: Refer to Fastener Caution in the Preface section.

3. Counterhold the water pump pulley with the EN-46104 holding tool and tighten the bolts (2) to 18 N·m (13 lb ft).
4. Install the drive belt. Refer to Drive Belt Replacement .
5. Install the drive belt and pulley cover. Refer to Drive Belt and Pulley Cover Installation .
6. Install the right front wheelhousing lining. Refer to Front Wheelhouse Liner Replacement .
7. Install the engine compartment insulator. Refer to Front Compartment Insulator Replacement .
8. Lower the vehicle.