Orlando

Engine Oil Cooler Replacement - 2.0L Diesel LNP

1. Drain the engine oil. Refer to Engine Oil and Oil Filter Replacement .
2. Drain the engine cooling system. Refer to Cooling System Draining and Filling .
3. Remove the generator. Refer to  Generator Replacement : 1.8L 2H0  → 2.0L Diesel LNP .
4. Remove the engine oil cooler outlet hose. Refer to  Engine Oil Cooler Outlet Hose Replacement : 2.0L Diesel LNP .
5. Remove the exhaust gas recirculation valve cooling feed hose. Refer to Exhaust Gas Recirculation Valve Cooling Feed Hose Replacement .



6. Remove the 8 engine oil cooler retaining bolts (3, 4).
7. Remove the engine oil cooler (2) along with the 2 engine oil cooler gaskets (1).

1. Clean the sealing surfaces.



2. Install the engine oil cooler (2) along with 2 NEW engine oil cooler gaskets (1).

Caution: Refer to Fastener Caution in the Preface section.

3. Install the 8 engine oil cooler retaining bolts (3, 4). Tighten the bolts to 25 N·m (18 lb ft).
4. Install the engine oil cooler outlet hose. Refer to  Engine Oil Cooler Outlet Hose Replacement : 2.0L Diesel LNP .
5. Install the exhaust gas recirculation valve cooling feed hose. Refer to Exhaust Gas Recirculation Valve Cooling Feed Hose Replacement .
6. Install the generator. Refer to  Generator Replacement : 1.8L 2H0  → 2.0L Diesel LNP .
7. Fill the engine cooling system. Refer to Cooling System Draining and Filling .
8. Fill in the engine oil. Refer to Engine Oil and Oil Filter Replacement .