Warning: Refer to SIR Warning in the Preface section.

Warning: In order to prevent accidental deployment and the risk of personal injury, do not dispose of an undeployed inflatable restraint seat belt pretensioner as normal shop waste. Undeployed seat belt pretensioners contain substances that could cause severe illness or personal injury if their sealed containers are damaged during disposal. Use the following deployment procedures to safely dispose of an undeployed seat belt pretensioner. Failure to observe the following disposal methods may be a violation of federal, state, or local laws.

Warning: Refer to SIR Seatbelt Pretensioner Handling Warning in the Preface section.

Preliminary Procedures

Remove the body side trim panel. Refer to Body Side Trim Panel Replacement - Left Side and/or Body Side Trim Panel Replacement - Right Side .

1

Rear Seat Number 2 Shoulder Belt Guide Bolt

Caution: Refer to Fastener Caution in the Preface section.

Tighten
45 N·m (33 lb ft)

2

Rear Seat Number 2 Shoulder Belt Anchor Plate Bolt

Tighten
45 N·m (33 lb ft)

3

Rear Seat Number 2 Shoulder Belt Retractor Bolt

Tighten
45 N·m (33 lb ft)

4

Rear Seat Number 2 Shoulder Belt