To the top of the document
Orlando
   
GMDE Start Page Load static TOC Load dynamic TOC Help?

Intake Camshaft Installation

Special Tools

EN-50432 Adaptor - Flywheel Fixing

For equivalent regional tools, refer to Special Tools .


    2373214

    Caution: Use extreme care when installing the camshaft not to nick, scratch, or damage the camshaft lobes or bearing surfaces.

    Note: 

       • Ensure that the crankshaft is fixed 90° beyond TDC with the EN-50433 fixing tool .
       • Install the camshaft guides in order as removed.
       • Clean the contact surfaces from camshaft, camshaft sprocket and camshaft sprocket bolt. Coat the camshaft bearing surfaces with engine oil.

  1. Install the intake camshaft (3).
  2. Note: Tighten the camshaft seat guide cap from cylinder 4 at first.

  3. Install the 4 camshaft seat guide caps (2).
  4. Caution: Refer to Fastener Caution in the Preface section.

  5. Install the 8 camshaft seat guide cap retaining bolts (1) and tighten to 10 N·m (89 lb in).
   


© Copyright Chevrolet. All rights reserved
   


© Copyright Chevrolet. All rights reserved