Preliminary Procedure

1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
2. Remove the front tyre and wheel assemblies. Refer to Tire and Wheel Removal and Installation .
3. Separate both of the outer track rod ends. Refer to Steering Linkage Outer Track rod Replacement .
4. Remove both of the stabilizer shaft links. Refer to Stabilizer Shaft Link Replacement .

1

Front Stabilizer shaft Clamp Bolt (Qty: 4)

Caution: Refer to Fastener Caution in the Preface section.

Tighten
25 N·m (18 lb ft)

2

Front Stabiliser Shaft