To the top of the document
Spark
   
GMDE Start Page Load static TOC Load dynamic TOC Help?

Camshaft Sprocket Removal

Special Tools

    • EN-956-1 Extension
    • EN-50514 Holder Camshaft

For equivalent regional tools, refer to Special Tools .


    2547322
  1. Remove the timing chain (1) from the camshaft sprocket (2) and the crankshaft sprocket (3).

  2. 2547323

    Note: The holding pins from the EN-50514 holder  (1) must be installed exactly in the holes (arrows) from the camshaft sprocket (2).

  3. Install the EN-50514 holder  (1) with the EN-956-1 extension to counterhold the camshaft sprocket (2).
  4. Note: Do not remove the camshaft sprocket bolt.

  5. Loosen the camshaft sprocket bolt .
  6. Remove the EN-50514 holder (1).

  7. 2547324
  8. Remove the camshaft sprocket bolt (1).
  9. Remove the positive crankcase ventilation oil separator (2).
  10. Remove the camshaft sprocket (3).
   


© Copyright Chevrolet. All rights reserved