Captiva |
||||||||
|
|
|
|||||||
Important:
• If corrosion of the pinch-weld flange is present, or if sheet metal repairs or replacements are required, refinish the pinch-weld flange in order to present a clean, primer-only surface. • If paint repairs are required, mask the flange bonding area, prior to applying the colour coat, in order to provide a clean, primer-only surface. • Appropriate materials for these primer applications are typically 2 component catalysed products. Use materials such as BASF DE15®, DuPont 2610®, Sherwin-Williams PSE 4600 and NP70® and Martin-Semour 5120 ,5130® , PPG DP90LF SPIES/HECKER 3688/8590 - 3688/5150 - 4070/5090 STANDOX 11158/13320 - 14653/14980 products are approved for this application. Follow the manufacturer's directions for the mix, the application, and the drying times. • After repairing the opening as indicated, use adhesive systems which meet GM Specification GM 3651G.
Use only the full cut method, also known in the field as full strip method, when installing windows.
This method includes the following:
| • | The replacement of a majority of the adhesive bead. Remove all but approximately 2 mm (3/64 in) of the existing bead of adhesive from the pinch-weld flange. |
| • | Apply pinch-weld primer to any exposed painted areas on the pinch-weld flange. |
No mounds or loose pieces of adhesive should remain on the pinch-weld flange. Do not remove all traces of adhesive.
| © Copyright Chevrolet. All rights reserved |
