To the top of the document
Captiva
   
GMDE Start Page Load static TOC Load dynamic TOC Help?

Rear Output Drive Housing Cleaning and Inspection


1708637

Callout

Component Name

Preliminary Procedures

  1. Clean all components in cleaning solvent and air dry.
  2. The transfer case internal components are not to be serviced. If internal components other than seals are damaged, the transfer case must be replaced.

1

Transfer Case Rear Output Shaft Flange

Tip

    • Replace if flange, threaded holes, or splines are damaged.
    • Inspect sealing surface for corrosion, excessive wear, or damage.

2

Transfer Case Rear Output Shaft Oil Slinger

Tip
Replace the slinger if damaged, cracked, loose, or distorted.

3

Transfer Case Rear Output Shaft Bearing Assembly

Tip
Inspect bearings for roughness, spalling, or pitting.

4

Transfer Case Rear Output Shaft Housing

Tip

    • Inspect for cracks, broken areas, or other damage.
    • Inspect bearing races for roughness, brinelling, or pitting.
    • Inspect the O-ring channel for porosity or damage.
    • Scratches or nicks in other areas may be repaired with light sanding.

5

Transfer Case Rear Output Shaft Splines

Tip
Inspect for damage and press fit to flange.

6

Transfer Case Rear Output Shaft

Tip
Inspect for pitting, excessive wear, or damage.

   


© Copyright Chevrolet. All rights reserved