Captiva

Ignition Switch Lock Cylinder Replacement

1. Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection .
2. Remove the steering column cover. Refer to Steering Column Trim Cover Replacement .



3. Set the ignition key to ACC position.
4. Remove the key cylinder by pushing the disassemble button and pulling out the key, at the same time.

1. Set the ignition key to ACC position.
2. Install the key cylinder by pushing it into the key cylinder housing.



3. Install the steering column cover. Refer to Steering Column Trim Cover Replacement .
4. Connect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection .