Captiva
Turn Signal Multifunction Switch Replacement — Short Body
Removal Procedure
Disconnect the negative battery cable. Refer to
Battery Negative Cable Disconnection and Connection
.
Remove the steering column covers. Refer to
Steering Column Trim Cover Replacement
.
Remove the indicator switch by pushing in on the tabs on the top and the bottom of the switch housing.
Disconnect the electrical connectors from the indicator switch.
Installation Procedure
Connect the electrical connectors to the indicator switch.
Install the indicator switch by snapping the switch into the housing.
Install the steering column covers. Refer to
Steering Column Trim Cover Replacement
.
Connect the negative battery cable. Refer to
Battery Negative Cable Disconnection and Connection
.
© Copyright Chevrolet. All rights reserved