To the top of the document
Captiva
   
GMDE Start Page Load static TOC Load dynamic TOC Help?

Body Control Module Programming and Setup

The procedures below are designed to program the BCM correctly during BCM related service. Before you start, read these procedures carefully and completely.

Important: The vehicle will not start and many other functions may not operate properly if a replacement BCM is not properly set up. The following procedures must be followed:

  1. Programming the BCM
  2. Learning the restraints ID

Programming the BCM

From the Main Menu, select Service Programming System, then follow the instructions on the screen.

Learning the Restraints ID

Navigate on the scan tool to Body, Body Control Module, Programming, SDM ID, then follow the instructions on the screen.

   


© Copyright Chevrolet. All rights reserved