To the top of the document
Captiva
   
GMDE Start Page Load static TOC Load dynamic TOC Help?

Symptoms - Wiper/Washer Systems

Note: The following steps must be completed before using the symptom tables.

  1. Perform the Diagnostic System Check - Vehicle before using the Symptom Tables in order to verify that all of the following are true:
    2. • There are no DTCs set.
    • The control modules can communicate via the serial data link.
  2. Review the system operation in order to familiarize yourself with the system functions. Refer to Wiper/Washer System Description and Operation .

Visual/Physical Inspection

    • Inspect for aftermarket devices which could affect the operation of the Instrument Cluster or Audible Warning Systems.
    • Inspect the easily accessible or visible system components for obvious damage or conditions which could cause the symptom.
    • Inspect for proper fluid level.

Intermittents

Faulty electrical connections or wiring may be the cause of intermittent conditions. Refer to Testing for Intermittent Conditions and Poor Connections .

Symptoms

Refer to a symptom diagnostic procedure from the following list in order to diagnose the symptom:

    •  Rear Wiper Inoperative
    •  Washers Inoperative
    •  Windscreen Wiper System Malfunction
   


© Copyright Chevrolet. All rights reserved