To the top of the document
Captiva
   
GMDE Start Page Load static TOC Load dynamic TOC Help?

Stabilizer Shaft Insulator Replacement

Removal Procedure

  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .

  2. 929945
  3. Remove the stabilizer bar clamp to cradle bolts.
  4. Remove the stabilizer bar clamps and bushings from the stabilizer bar.

Installation Procedure


    929945
  1. Install the stabilizer bar clamps and bushings to the stabilizer bar.
  2. Caution: Refer to Fastener Caution in the Preface section.

  3. Install the stabilizer bar clamp to cradle bolts and tighten to 50 N·m (37 lb ft).
  4. Lower the vehicle.
   


© Copyright Chevrolet. All rights reserved