1

DT-47811-A Transmission Lift Plate

Warning: Handle with care, the transmission assembly weighs over 83 Kg (183 lbs). Bodily injury could occur if not handled properly.

Caution: Refer to Fastener Caution in the Preface section.

Procedure

Tighten bolts and nut.

Tighten
12 N·m (106 lb in)

Special Tools

DT-47811-A Transmission Lift Plate

For equivalent regional tools, refer to Special Tools .

2

DT-46625 Transmission Holding Fixture

Procedure

1. Raise the transmission with an overhead hoist.
2. Adjust mounting block on fixture to match bosses on case, then tighten bolts.

Tighten
13 N·m (10 lb ft)

Special Tools

DT-46625-10 Holding Fixture Adapter

For equivalent regional tools, refer to Special Tools .