Captiva

Air Conditioning (A/C) Refrigerant Pressure Sensor Replacement

Warning: Refer to Battery Disconnect Warning in the Preface section.




1. Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection .
2. Release the connector lock and pull the transducer wire connector out.
3. Remove the transducer with a spanner.
4. Discard the O-ring seal.

1. Install the new O-ring seal on the transducer.

Caution: Refer to Fastener Caution in the Preface section.

2. Install the pressure transducer and tighten to 7 N·m (62 lb in).
3. Connect the wire connector.
4. Connect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection .