To the top of the document
Captiva
   
GMDE Start Page Load static TOC Load dynamic TOC Help?

Engine Shield Replacement

Removal Procedure


    1819597
  1. Raise and suitably support the vehicle. Refer to Lifting and Jacking the Vehicle .
  2. Remove the bolts and the engine shield.

Installation Procedure

    Caution : Refer to Fastener Caution in the Preface section.


    1819597
  1. Install the engine shield with the bolts and tighten to 10 N·m (89 lb in).
  2. Lower the vehicle.
   


© Copyright Chevrolet. All rights reserved