Captiva

Engine Protection Shield Replacement

1. Raise and suitably support the vehicle. Refer to Lifting and Jacking the Vehicle .
2. Remove the front wheel. Refer to Tyre and Wheel Removal and Installation .
3. Remove the nut and clips.
4. Remove the engine protection shield.

Caution : Refer to Fastener Caution in the Preface section.




1. Install the engine protection shield with the nut and clips. Tighten the engine front shield nut to 10 N·m (89 lb in).
2. Install the front wheel. Refer to Tyre and Wheel Removal and Installation .
3. Lower the vehicle.