Captiva

Engine Mount Replacement - LE5 or LE9

1. Remove the air cleaner assembly. Refer to Air Cleaner Assembly Replacement : LE5 or LE9 .
2. Support the engine with a hydraulic floor jack. Use a piece of wood between the floor jack and the sump.
3. Remove the engine mount to bracket bolts (1).
4. Remove the engine mount to side rail bolts (2).
5. Remove the engine mount from the engine compartment.

1. Place the engine mount onto the side rail studs.

Caution: Refer to Fastener Caution in the Preface section.

2. Install the engine mount to side rail bolts (2) and tighten to 50 N·m (37 lb ft).

Note: The engine mount to bracket bolts must be hand started. Do not prize the engine mount to align the holes.

3. Install the engine mount to bracket bolts (1) and tighten to 90 N·m (66 lb ft).
4. Remove the hydraulic floor jack from under the sump.
5. Install the air cleaner assembly. Refer to Air Cleaner Assembly Replacement : LE5 or LE9 .