To the top of the document
Captiva
   
GMDE Start Page Load static TOC Load dynamic TOC Help?

Oil Pump Installation


    1579118
  1. Align the oil pump drive gear with the crankshaft flats and install the oil pump to the engine block.
  2. Align the pump body with the mounting holes in the cylinder block.
  3. Caution: Refer to Fastener Caution in the Preface section.

  4. Install the oil pump bolts and tighten to 25 N·m (18 lb ft).
   


© Copyright Chevrolet. All rights reserved