Captiva

Oil Filter Adapter Cleaning and Inspection

1. Clean the oil filter adapter components with non-corrosive solvent.

Warning: Refer to Safety Glasses Warning in the Preface section.

2. Dry the oil filter adapter components with compressed air.

Note: The internal parts of the oil filter adapter housing are not serviced separately. If wear or damage is noted, replace the entire oil filter adapter assembly.

1. Inspect the oil filter adapter housing for cracks, casting imperfections or damage (1).
2. Inspect the threads for the oil pressure sender (2) or the bracket (6) for damage.
3. Inspect the oil filter sealing surface (3) for damage.
4. Inspect the threads for the oil filter fitting (4) for damage.
5. Inspect the mounting holes (5) for damage.



6. Inspect the oil filter adapter housing gasket sealing surface (1) for damage.
7. Inspect the oil filter adapter housing passages (2) for damage or blockage.
8. Repair or replace the oil filter adapter housing as necessary.